BETAFPV Meteor65 Pro Brushless Whoop Quadcopter (1S) – ELRS 2.4G

METEOR65 PRO IS DESIGNED FOR EXPRESSLRS PILOT IN THIS 2021 WINTER!

Meteor65 Pro comes with 35mm propeller for power improvement and flexible flying experiment. Beyond that, it has almost the same components as Meteor65, like F4 1S 5A FC board with built-in ExpressLRS receiver, up to 350mW M03 VTX, 19500KV 0802SE motors etc.

How to Bind with Betaflight FC with SPI ExpressLRS Receiver.

Specification

Item: Meteor65 Pro 1S Brushless Whoop

Weight: 22.0g (without battery)

FC&ESC: F4 1S 5A FC (ELRS 2.4G)

Frame: Meteor65 Pro 65mm 1S Brushless Frame

Motors: 0802SE 19500KV Motor

Props: 35mm 3-blade props (1.0mm Shaft)

Camera: C02 Micro Camera

VTX: M03 25-350mW VTX

Canopy: Canopy for Micro Camera

Battery: BT2.0 300mah 1S Battery

Flight time: 4 minutes

Meteor65 Pro Frame & 35mm Propeller
Meteor65 Pro frame has the same perfect performance as the popular Meteor65 frame. The lightest lower profile 65mm frame to fit 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.

BT2.0 Connector
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A. You can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag

Motors
0802SE 19500KV Motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight which is only 1.83g/pc but also ensuring the awesome performance of power and thrust. Lead wire soldered to the PCB, which allows you to repair it easier once it disconnected.

And the Racing version of Meteor65 is using the 0802 22000KV motors, which uses a ball bearing instead of brass bushings, and PCB connector. More durable and easier to repair once disconnected.

FAQ

1. Cli Dump of Meteor65 Pro Whoop Quadcopter (Click here to find the details).

Package

1 * Meteor65 Pro Brushless Whoop Quadcopter (1S)

2 * 300mAh 1S 30C Battery with BT2.0 connector

1 * BT2.0 Battery Charger and Voltage Tester

1 * TypeC USB cable

1 * Customized Carry Case

1 * Spare 35mm 3-blade props (1.0mm Shaft)

1 * Screwdriver